Bosch Avantixx WVD24460GB Operating And Installation Instructions Download Page 55

Page: 55 / 64

Installation instructions

Installing, connecting and transporting

Safety instructions

Risk of injury!

The washer-dryer is heavy. Take care when lifting it.

Caution

Frozen hoses may tear/burst. Do not install the
washer-dryer in an area where there is a risk of frost or
outdoors.

The washer-dryer may be damaged. Do not lift the
washer-dryer by its projecting parts (e. g. door).

In addition to the safety information listed here, the
local water and electricity supplier may have special
requirements.

If in doubt, have the appliance connected by a
specialist.

Standard

accessories

– Water-inlet hose.

– Elbow for attaching the drainage hose e.g. to the

sink.

– Power cord.

Moisture in the drum is due to the final inspection
which every washer-dryer undergoes before it leaves
the factory.

Depending on the connection situation, the following
part is also required:

– 1 hose clip

24-40 mm (DIY store) is also

required for connection to a siphon.

The bag contains:

– Covers for holes left by removing the transport

bolts.

Summary of Contents for Avantixx WVD24460GB

































































Search results

Summary of Contents for Avantixx WVD24460GB

Reviews:

Related manuals for Avantixx WVD24460GB

Brands by name

Popular brands

Bosch Avantixx WVD24460GB, Operating And Installation Instructions

Search results

Summary of Contents for Avantixx WVD24460GB

Reviews:

Related manuals for Avantixx WVD24460GB

Brands by name

Popular brands