Bosch AUTODOME inteox 7000i 2MP, Installation Manual, Page: 19 / 66

AUTODOME inteox 7000i - 2MP (pendant) (Optional) Installing an SD Card | en 19
Bosch Security Systems Installation Manual (pendant) 2020-07 | 1.0 |
6 (Optional) Installing an SD Card
The camera can accept a customer-supplied SDHC or SDXC memory card (hereafter referred
to as “SD card”) for local storage. (The camera will not accept MicroSD cards.) Using an SD
card is optional.
Note: Disconnect power to the camera while adding or removing an SD card.
1. Follow the steps in one of these sections (depending on the type of camera mount):
Remove bubble from in-ceiling housing or Remove bubble from pendant housing.
2. Slide the SD card into the slot. Press down the end of the SD cards until you hear a click
and the card locks into place.
3. Follow the steps in one of these sections (depending on the type of camera mount):
Replace the bubble in an in-ceiling housing or Replace the bubble in a pendant housing.