22
en
Overview
Overview
X
Fig.
A
1 Multicooker (basic appliance)
2 Control panel
3 Lid
4 Opening button for the lid
5 Removable steam outlet
6 Mains connection
7 Pan with non-stick coating
8 Removable lid insert
9 Steamer insert
10 Pan tongs
11 Mains cable
Accessories
(available separately)
12 MAZ0FB deep frying basket
Control panel
The control panel consists of controls
(buttons) and indicators (LEDs). The
buttons can be used to select the individual
preparation programmes and adopt the
different setting options (e.g. preparation
temperature and time). The settings are
indicated via the illuminated LEDs and the
display.
X
Fig.
B
Controls
B
Standby
D
Selection of a preparation
programme
E
Adapting the pre-configured
preparation time
(short)
(medium)
(long)
G
Start programme
A
Setting the start time delay
C
Setting an individual preparation
temperature
F
Setting an individual preparation
time
H
Deleting a setting or stopping the
programme
X
Fig.
C
Indicators
a
Display
b
(start delay)
c
Preparation steps/programme
progress
d
(finished)
e
(keep warm)
f
Display of the pre-configured
preparation time
g
List of preparation programmes
h
(my recipe)
Before using for the first
time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Warning!
Never operate a damaged appliance!
■
Remove the base unit and all
accessories from the packaging and
dispose of the packing materials.
■
Check that all parts are present and
examine them for obvious damage.
X
Fig.
A
■
Thoroughly clean and dry all parts
before using for the first time.
X
“Cleaning and maintenance” see
page 27
Preparation
Take note of the safety instructions at the
beginning of the manual.
X
Image sequence
D
1.
Place the base unit on a flat, clean and
stable surface.
2.
Connect the supplied mains cable to the
appliance first and then connect it to the
socket.
3.
On the control panel, buttons
B
and
G
and all LEDs briefly light up once
and a five-level signal tone sounds.
Button
B
then flashes. The
appliance
is in standby mode and is ready for
operation.
