(73,1)
[ Edit: 2019/ 9/ 13
Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
UPDATING SYSTEM SOFTWARE (if
so equipped)
WARNING
TO AVOID RISK OF DEATH OR SERIOUS
PERSONAL INJURY WHEN UPDATING
THE SYSTEM SOFTWARE:
If you choose to park the vehicle
within range of a Wi-Fi connection,
park the vehicle in a secure, safe well-
ventilated location that is open to the
air. During the update process, if you
choose to park your vehicle, it should
be kept in a well ventilated area to
avoid exposure to carbon monoxide.
Do not breathe exhaust gases; they
contain colorless and odorless carbon
monoxide. Carbon monoxide is dan-
gerous. It can cause unconsciousness
or death.
1.
Apply the parking brake.
2.
Remain with the vehicle while the
update is in process.
3.
Do not allow children, pets or
people who may need assistance
to remain in the vehicle while the
software is updating.
NOTE:
The vehicle is not required to be parked
during the software update process. If
the vehicle disconnects from the Wi-Fi
connection, it will resume when the
vehicle reconnects to a known Wi-Fi
connection.
INFO:
.
You will be charged separately when
the network communication is made
via smartphones.
.
The download data size of software
updates can vary between 80 MB and
300 MB. If you use your smartphone as
a Wi-Fi connection, you may incur data
charges from your phone carrier.
Please connect to a secure WPA2 Wi-
Fi network to avoid potential phone
carrier data charges.
.
The system prioritizes Wi-Fi connec-
tion (if so equipped) over TCU (Tele-
matics Control Unit) when Wi-Fi
network connection is available.
How to update from the pop-up
screen
When both of the following conditions are
met, the system informs the driver with a
pop-up on the screen when system soft-
ware update is available.
.
[Auto] is selected under [Update Meth-
od].
“How to update from the system
menu” (page 5-6)
.
Wi-Fi or TCU (Telematics Control Unit)
(if so equipped) network connection is
available.
1.
When the pop-up appears and
prompts the driver to perform the
system software update, operate the
system according to the guides shown
on the screen to download the up-
dates. Another pop-up will appear
when downloading is complete.
2. After the system software update is
complete, place the ignition switch in
the OFF position and leave the system
for 20 minutes without operating the
switches on the control panel and the
steering wheel. Place the ignition
switch in the ON position and the
updated software will be available.
5. Information
Condition:
5-5
