1 689 989 245
2015-04-28
|
Robert Bosch GmbH
Initial commissioning | 0 986 610 825 | 19
en
5. Lubricants and auxiliary
materials
To clean tools and protect shims and sealing rings, use
the following test oil:
"Divinol Calibration Fluid 2928V3".
Contact details:
Test oil: Divinol Calibration Fluid 2928V3
Manufacturer: Gmelin GmbH & Co. KG
Internet: http://www.zeller-gmelin.de
i
This test oil is also used in conjunction with the
Bosch test benches EPS 1xx, EPS 2xx, EPS 7xx,
EPS 8xx.
!
Dispose of the test oil in compliance with regional
disposal and environmental regulations.
!
Ingress of particles from dirty compressed air can
result in malfunction. For this reason, only connect
the mounting unit to a compressed-air maintenance
unit with a water separator and filter having a pore
size of 0.01 μm (see also section 9 "Technical data").
Installing the mounting unit
1.
Set the compressed-air supply (fig. 1, item 3) from
the workshop's compressed-air system to 0 bar.
2.
Attach the mounting unit (fig. 1, item 2) to the
mounting device with the two cheese head bolts
M5x8 (fig. 1, item 8).
3.
Insert the hose (fig. 1, item 6) into the connector
(fig. 1, item 7) on the mounting unit.
4.
Attach the compressed-air connection (fig. 1,
item 5) from the workshop compressed-air system
to the coupling connector on the mounting unit
(fig. 1, item 4).
5.
Set the compressed-air supply (fig. 1, item 3) from
the workshop's compressed-air system to
5.0 – 5.5 bar.
"
The mounting unit is ready for use.
!
Detailed information on operating and handling can
be found in the separate ESI[tronic] repair manual
UI-P.
