21
Hardware:
H14
‐
1/4
x
5
Hex
Bolt
H8
‐
1/4
x
4
‐
1/4
Hex
Bolt
S3
‐
#8
x
2
‐
12"
Wood
Screw
PG 9
Hardware:
H14
‐
1/4
x
5
Hex
Bolt
H8
‐
1/4
x
4
‐
1/4
Hex
Bolt
S3
‐
#8
x
2
‐
12"
Wood
Screw
PG 9
F:
On one long side place the Front Beam Assembly with the (499) Plaque against the Corner Post Assemlies
with (499) Plaque facing out. Loosely attach Front Beam Assembly to each (190) Corner Post and (527) Corner
Panel Post with one 1/4 x 5” Hex Bolt (with 1/4” lock washer,
5/16” flat washer
and 1/4” t-nut) per post.
Top of the
Front Beam Assembly should be flush to the tops of (190) Corner Posts and (528) Panel Posts. This will be the
front of the assembly. (fig. 7.3 and 7.4)
G:
Loosely attach Front Beam Assembly to each (528) Panel Post with one 1/4 x 4-1/4” Hex Bolt (with 1/4” lock
washer,
5/16” flat washer and 1/4” t-nut) per post. (fig. 7.3 and 7.4)
H:
Make sure Front Beam Assembly is level then attach to Corner Post Assemblies with six #8 x 2-1/2” Wood
Screws
(fig. 7.3 and 7.4)
I:
Repeat Steps F - H for the other Front Beam Assembly on the opposite long side.
Hardware
4 x 1/4 x 4-1/4” Hex Bolt
(1/4” lock washer, 5/16” flat washer, 1/4” t-nut)
4 x 1/4 x 5” Hex Bolt
(1/4” lock washer, 5/16” flat washer, 1/4” t-nut)
12 x #8 x 2-1/2” Wood Screw
Fig. 7.3
Fig. 7.4
1/4”
T-nut
Front Beam
Assembly
(528) Panel
Post
1/4 x 4-1/4”
Hex Bolt
1/4” Lock
Washer
(527) Corner
Panel Post
5/16” Flat
Washer
Long Side
Long Side
1/4 x 5”
Hex Bolt
#8 x 2-1/2”
Wood Screw
1/4” T-nut
#8 x 2-1/2”
Wood
Screw
(190)
Corner
Post
1/4” Lock
Washer
5/16” Flat
Washer
Corner Post
Assembly
Corner Post
Assembly
Corner Post
Assembly
Front Beam
Assembly
(499) Plaque
to face out
Step 7: Frame Assembly
Part 2