15
Step 3: Create Corner Post Assemblies
Part 2
B:
Place two Post Panel Assemblies against
one (190) Corner Post so the (527) Corner
Panel Posts are flush to the tops and bottoms
of the (190) Corner Post so they create a
corner piece. (fig. 3.3)
C:
Attach each (527) Corner Panel Post to
each (190) Corner Post with six #8 x 2-1/2”
Wood Screws per Corner Post Assembly in
the pre-drilled holes. (fig. 3.3)
D:
In the indicated area below pre-drill two
pilot holes at a slight angle using a 1/8” drill
bit then attach (527) Corner Panel Posts to
(190) Corner Posts with two #8 x 2-1/2” Wood
Screws per Corner Post Assembly. (fig. 3.3
and 3.4)
E:
Repeat Steps B - D to create four Corner
Post Assemblies.
PG 4
Repeat for 3 more Assemblies
(527)Corner Post (1)
S3 - Wood Screw (8)
Hardware
Fig. 3.3
32 x #8 x 2-1/2” Wood Screw
#8 x 2-1/2”
Wood Screw
x 6
(already
pre-drilled
holes)
Fig. 3.4
(190)
Corner
Post
(190) Corner
Post
(527) Corner
Panel Post
#8 x 2-1/2” Wood
Screw x 2
(pre-drill
holes and install at a
slight angle for these
screws only)
(527) Corner
Panel Post
(527) Corner
Panel Post
Flush
Flush
Wood Parts
4 x (190) Corner Post 69.9 x 69.9 x 2311.4 mm (2-3/4 x 2-3/4 x 91”)
(528)
Panel
Post
Note: Holes in (527)
Corner Post to be at
top of the assembly
