12
A:
In between two (579) Rail T/Bs place three (580) Ballusters. The two outside (580) Ballusters should measure
3” from the edge of each (579) Rail T/B. The middle (580) Balluster should be evenly spaced between the first
two. Pre-drill with a 1/8” drill bit then attach all three (580) Ballusters to both Rail T/Bs with two #10 x 4” Wood
Screws per balluster. (fig. 2.1)
B:
Repeat Step A seven more times to make eight Balluster Assemblies.
Step 2: Post Panel Assemblies
Part 1
Hardware
Wood Parts
Fig. 2.1
Evenly
Spaced
16 x (579) Rail T/B 76.2 x 69.9 x 408.9 mm (3 x 2-3/4 x 16-3/32”)
24 x (580) Balluster 38.1 x 38.1 x 863.6 mm (1-1/2 x 1-1/2 x 34”)
48 x #10 x 4” Wood Screw
(579) Rail T/B
#10 x 4”
Wood Screw
#10 x 4”
Wood Screw
(580)
Balluster
3”
3”
(579) Rail T/B
(580)
Balluster
