Borrowed Spaces CHARLESTON PERGOLA YM11762, Installation And Operating Instructions Manual

Page: 35 / 46

35
support@borrowedspaces.com
Bar Frame
HARDWARE
16 ‐ S2 ‐ #8 X 1 ‐ 1/2" W.S
2 ‐ y50000 ‐ 512 ‐ Side Joist
1 ‐ y50000 ‐ 501 ‐ FrontBack Shelf
2 ‐ y50000 ‐ 508 ‐ Joist
1 ‐ y50000 ‐ 510 ‐ Bar Back
Notice FR BK Shelf overhangs 5/8" the joists
as well as the Bar Back, for table top install.
The spacing b/w joists is 16 ‐ 1/2"
and 18" from Bar Back to first Side Joist
Hardware
Wood Parts
A: Flush to the ends and bottom of one (501) Front Back Shelf place one (512) Side Joist at each end and
attach with two #8 x 1-1/2” Wood Screws per joist. Notice orientation of screw holes on face of boards. There
will be a 5/8” overhang at the top of (501) Front Back Shelf. (fig. 14.1)
B: Place two (508) Joists centred over the pilot holes in the middle of (501) Front Back Shelf, flush to the bottom
of the board, then attach with two #8 x 1-1/2” Wood Screws per joist. There will be a 5/8” overhang at the top of
(501) Front Back Shelf. The distance between joist should be 16-1/2”. (fig. 14.1)
C: Place one (510) Bar Back agaist each joist so the bottoms are flush and the distance from one (512) Side
Joist to the end of (510) Bar Back is 18” then attach with two #8 x 1-1/2” Wood Screws per joist. There will be a
5/8” overhang at the top of (510) Bar Back. (fig. 14.1)
2 x (512) Side Joist 31.8 x 69.9 x 406.5 mm (1-1/4 x 2-3/4 x 16”)
1 x (501) Front Back Shelf 15.9 x 85.7 x 1384.3 mm (5/8 x 3-3/8 x 54-1/2”)
2 x (508) Joist 31.8 x 69.9 x 406.5 mm (1-1/4 x 2-3/4 x 16”)
1 x (510) Bar Back 15.9 x 85.7 x 2295.5 mm (5/8 x 3-3/8 x 90-3/8”) 16 x #8 x 1-1/2” Wood Screw
Step 14: Bar Assembly - Bar Frame
Part 1
5/8”
#8 x 1-1/2” Wood
Screw x 4 per joist
(501) Front
Back Shelf
(508) Joist
(510) Bar Back
(512) Side
Joist
Notice orientation
on both (512) Side
Joists
Fig. 14.1
Flush
(512) Side
Joist
18”
16-1/2”
16-1/2”
16-1/2”
Notice holes towards
bottom of board