20
Hardware:
H14
‐
1/4
x
5
Hex
Bolt
H8
‐
1/4
x
4
‐
1/4
Hex
Bolt
S3
‐
#8
x
2
‐
12"
Wood
Screw
PG 8
Hardware:
H14
‐
1/4
x
5
Hex
Bolt
H8
‐
1/4
x
4
‐
1/4
Hex
Bolt
S3
‐
#8
x
2
‐
12"
Wood
Screw
PG 8
Hardware
Fig. 7.1
4 x 1/4 x 4-1/4” Hex Bolt
(1/4” lock washer, 5/16” flat washer, 1/4” t-nut)
4 x 1/4 x 5” Hex Bolt
(1/4” lock washer, 5/16” flat washer, 1/4” t-nut)
12 x #8 x 2-1/2” Wood Screw
Fig. 7.2
1/4”
T-nut
(hidden)
Beam End
Assembly
(528) Panel
Post
Step 7: Frame Assembly
Part 1
1/4 x 4-1/4”
Hex Bolt
1/4” Lock
Washer
(485) Beam
End 10-1/2
(486) Beam
57-1/2
(527) Corner
Panel Post
Short Side
A:
On one short side place one Beam End Assembly against one (190) Corner Post and (528) Panel Post and
loosely attach to (190) Corner Post and (527) Corner Panel Post with one 1/4 x 5” Hex Bolt (with 1/4” lock washer,
5/16” flat washer and 1/4” t-nut). (485) Beam End 10-1/2” faces out. (fig. 7.1 and 7.2)
B:
Repeat Step A for the second Corner Post Assembly on the same side. (485) Beam End 10-1/2” faces out.
(fig. 7.1 and 7.2
)
C:
With a helper place one (486) Beam 57-1/2 in between both Beam End Assemblies interlocking the cutouts
then attach Beam End Assembly and (486) Beam 57-1/2 to (528) Panel Posts with one 1/4 x 4-1/4” Hex Bolt (with
1/4” lock washer,
5/16” flat washer and 1/4” t-nut) per side. (fig. 7.1 and 7.2)
D:
Make sure (486) Beam 57-1/2 and both Beam End Assemblies are level then attach to Corner Post
Assemblies with six #8 x 2-1/2” Wood Screws (three per Beam End Assembly). (fig. 7.1 and 7.2)
E:
Repeat Steps A - D on the opposite short side.
Short Side
1/4 x 5”
Hex Bolt
#8 x 2-1/2”
Wood Screw
1/4”
T-nut
#8 x 2-1/2”
Wood Screw
(190) Corner
Post
1/4” Lock
Washer
5/16” Flat
Washer
Corner Post
Assembly
Corner Post
Assembly
Corner Post
Assembly
5/16” Flat
Washer
2 x (486) Beam 57-1/2 - 38.1 x 139.7 x 1460.5 mm (1-1/2 x 5-1/2 x 57-1/2”)
Wood Parts
