28
29
Problem
Solution (voice prompt)
Attention!
If overheating occurs, it is necessary to let the device cool
Overheating of the device chamber. It is necessary to let the device cool.
Open the cover, remove the baking form and allow the device to cool.
Attention!
Low temperature inside the device, place it in a warmer environment
Low temperature inside the device. Place the device in a warmer environment.
The room temperature should not be lower than 10°C.
Attention!
The device short circuited , contact an authorized service center
The device short circuited , contact an authorized BORK service center for diagnostics
and/or repairs.
Attention!
The temperature sensor has failed, contact the service center
The temperature sensor has failed, contact an authorized BORK service center
for diagnostics and/or repairs.
Dear customers, if you have any questions related to purchase, operation and maintenance of BORK equipment,
please call this phone number
8 800 500 88 99
(Information and support).
• Please read this manual before using the device.
Non-compliance to the guidelines may lead to
personal injury and/or property damage.
• Before device operation make sure that
characteristics of the power supply are in
compliance with the product rating label.
• Connect the device to a grounded power outlet
only (the manufacturer (person authorized by the
manufacturer) does not assume any responsibility
for damages in absence of grounding, set in
accordance with local regulations).
• This device is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge of the product.
• This device is intended for use only in home
conditions.
• Make sure to remove all packing materials before
turning the device on for the first time.
• Do not allow the power cord to come into contact
with hot surfaces.
• Place the device only on even, stable, and heat
resistant surfaces.
• Make sure that there is space between the device
and any outlying obstacles or walls. Do not place
the device near any object that could be affected
by heat.
• Do not place the device on any heated surfaces,
gas or electric burners.
• Do no connect or disconnect the device from the
power outlet with wet hands.
• The housing of the device can become heated
during its operation.
• Avoid direct sunlight. Do not install the device near
other sources of heat.
• Keep the device clean. Clean the device after
each use. In the course of cleaning: follow the
instructions, provided in the “Cleaning” section.
• Do not use wire sponges, chemicals, abrasive
cleaners, or products containing sulfonylamide or
citric acid in order to clean the device.
• It is prohibited to insert any foreign objects or
liquids into the product’s housing and/or body, this
could damage the product.
• Unplug the power cord from the power outlet when
leaving the device unattended, at the end of use,
before cleaning, moving and before storage.
• Check the power cord, plug and housing regularly
for damage. Regularly check the power cord, plug
and bread maker itself for absence of damage.
• Transport the device only in the original packaging,
and in a fixed position.
Summary of Contents for X 780
Page 1: ...BREAD MAKER X 780 INSTRUCTION MANUAL ...
Page 2: ...INSTRUCTION MANUAL BREAD MAKER X 780 ...
Page 21: ......