BORK X 780, Instruction Manual

Page: 11 / 21

18 19
CLEANING
• Disconnect the device from power outlet.
• It is necessary to wait until the device cools
down after the end of cooking.
• Wash the baking form and blade used
to mix the dough under running water,
applying a small amount of liquid detergent
if necessary.
• If the blade can not be removed from the
baking form, pour a small amount of warm
water into it and let it soak for a few minutes.
• Wipe outer and inner surfaces of the body
with a damp cloth and then – wipe off any
leftover water with a dry cloth.
• Clean the inside surfaces of the baking form
and the device itself thoroughly after each
use.
Do not use sharp objects, abrasive or chemical
cleaning substances or solutions.
Do not wash the bread baking form or the
kneading blade in the dishwasher.
The bread case and the kneading blade must be
washed after each use.
DISPENSER CLEANING
Disassembly
• Open the dispenser cover at the angle of 90°
by pressing on the icon.
• Install the screwdriver into the groove
(as shown in the photo) and pry the pin
to the left in accordance with the directional
arrow.
ENERGY SAVING MODE
The device will switch to energy-saving mode
automatically if the controls are not activated
within 3 minutes – the brightness of the display
will decrease.
• Press any button on the device in order exit
the energy saving mode.
AFTER THE COOKING PROCEDURES
• Be careful at the end of the cooking process,
the device and the chamber will be very hot.
It is necessary to extract the bread from the
device after the baking process is complete to
avoid condensation forming on the crust. Due to
condensation the bread can become damp and
the crust can lose its crispiness.
• Remove the bread from the baking form after
cooking. Always use thermal mitts when
removing the baking forms from inside the
appliance.
• If the blade is stuck in a loaf, remove it with
the hook which comes with the device.
Do not use knives or any other metal objects
to remove the bread from the baking forms to
avoid causing damage to the non-stick surface.
HEATING FUNCTION
The device will be automatically switched to
the heating mode 2 minutes after the cooking
process is completed.
The display will show the icon, a voice
prompt will be issued and a corresponding
indicator will start to blink. The display will
also show a countdown until the end of
the heating cycle. The heating cycle lasts
58 minutes, after which the device is turned off.