BORETTI CRG916, User Manual

Page: 45 / 272

45
6.6.8 Overheating
The induction hob is fitted with a safety device that protects the internal
electronics against overheating. This device requires no attention from the user
and enables the hob to be used confidently without the risk of overheating.
6.6.9 Deactivating a single radiant element
On turning any knob anticlockwise and keeping it in that position for
more than 30 seconds, the relative display will show the adjacent
symbol to indicate the radiant element is deactivated.
i If the knob is not positioned correctly, the relative display will show
error code which signals deactivation of the radiant element. It is not
necessary to call Customer Service; to restore the radiant element,
simply return the knob to position “0” and reset the required power
value.
This function is advisable to disable a single radiant element if it is faulty or
malfunctioning. After the radiant element has been repaired
by the authorised
Technical Support Service , it can be reactivated by turning the knob
anticlockwise again and keeping it in that position for more than 30 seconds.
6.7 Automatic switch off
an automatic counter counts the time elapsing since the last power variation.
This determines the maximum heating duration, which varies according to the
power level selected. If a radiant element is left on by mistake (with a correctly
positioned pan), it will switch off automatically once the maximum heating
duration for the selected power is reached.
Selected power
level
1 2 3 4 5 6 7 8 9 P
Max time in
minutes
360 300 240 90 90 90 90 10
6.8 Switching off manually
Turn all the knobs to “off” position. Each display will show a flashing dot
as in the adjacent figure; after 15 seconds all the displays will switch off,
a beep will be emitted and the appliance with go to stand-by.
EN
Bor
etti Manual CRG916 / CRI915 / User guide - Installation advice