BORETTI CRG916, User Manual

Page: 31 / 272

31
Using and programming the digital analogue clock on ovens
The digital clock enables the oven to be set to automatically switch on and off.
Start cooking function
End cooking function
Set the time
Audible alarm / ‘minute minder’
The push knob is used to set the time, program cooking start and
end times, set the audible alarm (in “Minute Minder” mode) and
start/stop cooking manually.
Setting the time
Proceed as follows:
* Press the push knob 4 times until the LED flashes;
* Turn the push knob clockwise or anticlockwise to increase or decrease
the time; the minutes hand moves in 1-minute stages clockwise or
anticlockwise.
i The clock automatically exits time-setting mode 10 seconds after last
turning the push knob.
Cooking in manual mode
For using the oven without programming the electronic clock.
When the electronic clock is deactivated, the ovens may be used simply by
turning the appropriate control knobs (see the relative sections 7.3).
Programming cooking end time
After programming the cooking end time , the oven will switch on immediately
EN
Bor
etti Manual CRG916 / CRI915 / User guide - Installation advice