54
Proje
c
t
BIRTHNING BED AVE 2 SERVICE MANUAL
Date
06-2017
Version
1.2
6.8.3.2.1.
Calibration of the accelerometer
1. By using the spirit level, adjust the back-section to the
+2° position.
(+2
° is because of the inertia of loaded backrest movement.
When the backrest actuator current is cutted, the inertia of backrest
movement will finally get the backrest into 0
° position.)
2. On right back-section controller press at once this buttons:
o
Trendelenburg
o
Underlightning
o
Locking button
3. Hold the buttons and wait until the red LED of the locking button:
a. starts to shine
b. after next 2 seconds stops shining
4. Now the accelerometer is calibrated
