37
Proje
c
t
BIRTHNING BED AVE 2 SERVICE MANUAL
Date
06-2017
Version
1.2
6.5.2.
Calf supports
Every single calf support has the following parts:
-
1. Calf support
-
2. Calf support controller
-
3. Plastic cover
-
4. Telescopic part
-
5. Holding screw for the plastic cover
-
6. Locking nuts
-
7. Screws for adjustment of the tightness of movement of the calf support
6.5.2.1. Setting of calf support resistance against the calf pressure
1. Undo the plastic cover screw - number 5
2. Release the locking nuts
– number 6
3. Get the screws
– number 7 - tight or loose and try the movement.
4. Set the accurate tightness - the calf support has to be resistant to the pressure of calf,
when the calf support controller is not pressed.
