11
Proje
c
t
BIRTHNING BED AVE 2 SERVICE MANUAL
Date
06-2017
Version
1.2
3. Parameters
3.1.
Technical Parameters
Full length of the supporting area (incl. the foot section)
2122 mm
Minimum length in elementary rest-on condition
(without the foot section)
1570 mm
Bed width with handles in active position
980 mm
Bed width with handles in parking position
960 mm
Maximum height of the seat section (Trendelenburg 40
°)
1143 mm
Upholstery-part width (maximum)
890 mm
Upholstery-part length (maximum)
2050 mm
Castor diameter
150 mm
Height of the supporting area
including upholstery (seat section):
Minimum
600 mm
Maximum
1050 mm
Lift
450 mm
Speed of lift going up (max. patient load)
11.25 mm/s
Speed of lift going down (max. patient load)
20.45 mm/s
Upholstery thicknesses:
Foot section
65 mm
Back section
100 mm
Seat section
100 mm
Positioning angles:
Positioning angle of the back section
-10
°/+70°
Positioning angle of the seat section
0
°/+18.5°
Trendelenburg position
-10
°
Positioning angle of the leg rests
– vertical
0
°/+143°
Positioning angle of the leg rests
– horizontal
+60
°
Positioning angle of the foot section
0
°- 22°
Labels, stickers
– material
Polymeric PVC foil
Patient load
240 kg (529 lb.)
Safe operating load
255 kg (562 lb.)
Full weight of the product with no accessories
245 kg (540 lb.)
Full weight of the upper part of the birthing bed
including accessories
140 kg (308 lb.)
Full weight of the bottom part of the birthing bed
including accessories
96 kg (211 lb.)
Permissible load on the back section
(125 mm from the edge)
150 kg (330 lb.)
Permissible load of the foot section
(125 mm from the edge)
150 kg (330 lb.)
Permissible load on the leg rests
70 kg (154 lb.)
Permissible load on the side rails
75 kg (165 lb.)
vertical pressure
Permissible load on the horizontal bar
150 kg (330 lb.)
Noise level
Lower than 65 dB (A)
Nominal value of the fuse in the control unit (220-240V)
T 3.15 AL_250V
Nominal value of the fuse in the control unit (100-120V)
6.3 AL_125V
