EN
134
Installation
www.bora.com
i
Flush installation and surface installation
must be taken into account when positioning
the template.
125 mm from the top edge of the cooktop to
the middle of the cut-out.
X
Draw the back panel cut-out.
X
Saw out back panel cut-out.
10.7.5 Preparing kitchen units for
installation variant B (floor unit
with false floor under the
cooktop)
O
Cross bars on the kitchen unit in the area of the
worktop cut-out may need to be removed.
O
In the case of thin worktops, there must be a
sufficiently rigid support plate on the unit.
O
A false floor must be provided for under the
cooktop:
O
it must be fitted in such a way that it can be
removed for maintenance work.
O
To ensure sufficient cooktop ventilation, a
minimum distance of 15 mm to the bottom
edge of the cooktop is to be observed.
O
The back panel of the unit must be flush with
the false floor so that the recirculating air is not
directed into the front of the unit.
O
A minimum clearance of 25 mm between the
back panel of the unit and an adjacent kitchen
unit or room wall must be observed for the return
flow of the recirculation air.
O
The drawers and/or shelves in the floor unit must
be removable.
O
For correct installation, the drawers of the
floor unit must be shortened depending on the
installation situation.
Adjusting the back panel of the unit
X
Adapt the back panel according to the required
installation dimensions.
X
If necessary, move the back panel.
X
If necessary, extend the height of the back panel
so that the unit is closed to the front.
445
125
137
42
42
Fig. 10.21
Back panel cut-out
10
20
30
40
0
10
20
30
40
0
10
20
30
40
0
10
20
30
40
0
(68,5)
(222,5)
137
Schablone für Rückwandausschnitt
Template for cut-out on rear wall
R12,5
125
445
42
42
PURSU
003115-100
003115-100
Fig. 10.22
Template for back panel cut-out
X
Position the template on the back panel of
the unit with the help of the markings and
instructions.
