EN
108
Functions and operation
www.bora.com
Starting the function
The function can be started as long as the fill
quantity is shown in the fan display.
X
Tap the display
0
.
O
The remaining time is shown in the multi-function
display.
O
The operating panel display changes to the
standard display after 2 seconds.
O
The warming symbol and the timer symbol
is shown next to the cooking zone.
Time lapsed
O
10 seconds before the time lapses, the system
flashes the remaining time.
O
In the last 5 seconds of the countdown an
acoustic signal can be heard every second.
O
The time indicator
0 0 0
changes to the fan power
level.
O
After the end of the time, the cooking zone is
automatically deactivated (= power level
0
).
Showing the remaining time
The coffee function is active and the time counts
down:
X
Tap the display
0
.
O
The remaining time is shown for 2 seconds in the
multi-function display.
Hints and tips
Coffee is ready too early:
O
The filled water quantity is too low.
O
The set water quantity is too high.
O
The ground coffee is too coarse (the coffee may
taste watery).
O
The filled water is too warm. If no cooler water is
available, slightly reduce the set fill quantity.
O
The filter funnel is not filled to the brim with
ground coffee.
Some of the coffee doesn’t run through:
O
The filled water quantity is too high.
O
The set water quantity is too low.
O
The ground coffee is too fine (the coffee may
taste bitter).
O
The espresso pot wasn’t screwed together tightly.
O
The filter funnel contains too much coffee or the
ground coffee is compressed.
i
You can set a value between 50 and 900 ml.
Entering the fill quantity
X
Tap the required cooking zone.
O
The additional cooking zone functions are
displayed.
X
Tap the heat retention button twice
O
0
flashes in the cooking zone indicator.
O
The set fill quantity is shown for 2 seconds in the
fan display and in the slider.
X
Enter the fill quantity:
Entry
Increase quantity Decrease quantity
100 ml
intervals
Swipe upwards
Swipe downwards
10 ml
intervals Tap
Tap
Tab. 6.8
Entering the fill quantity
X
Long press on the indicator
0
.
O
The setting is saved and the operating panel
switches to the standard display.
i
The setting is saved until another change is
made on the appliance.
Brewing coffee
Preparing the espresso pot
X
Fill the bottom chamber with cold water to just
below the safety valve.
X
Insert the filter funnel.
X
Fill the filter funnel to the brim with ground coffee
and level it
O
without pressing down the coffee.
X
Screw the top chamber firmly onto the base.
O
Both chambers must be screwed together tightly.
X
Put the espresso pot on the cooking zone.
Activating the coffee function
X
Tap the required cooking zone.
O
The additional cooking zone functions are
displayed.
X
Tap the heat retention button twice
O
0
flashes in the cooking zone indicator.
O
The set fill quantity is shown for 2 seconds in the
fan display and in the slider.
