bora PL540E, Operating And Installation Instructions

Page: 17 / 36

EN
17
Installation
www.bora.com
Fixed
front
panel
thickness
[mm]
Total thick-
ness of
adjustment
plates
[mm]
Adjustment plates [quantity]
10 mm 5 mm 3 mm 2 mm
34 2 - - - 1
33 3 - - 1 -
32 4 - - - 2
31 5 - - 1 1
30 6 - - 2 -
29 7 - 1 - 1
28 8 - 1 1 -
27 9 - 1 - 2
26 10 1 - - -
25 11 - 1 2 -
24 12 1 - - 1
23 13 1 - 1 -
22 14 1 - - 2
21 15 1 1 - -
20 16 1 - 2 -
19 17 1 1 - 1
18 18 1 1 1 -
17 19 1 1 - 2
16 20 1 1 1 1
15 21 1 1 2 -
14 22 1 1 1 2
13 23 1 1 2 1
Tab. 6.3: Adjustment plate overview
Secure the control box
X X
Position the power level sleeve [4] on the fixed front
panel [3].
X X
Position the control box [1] with the attached
adjustment plates [2] from the back into the bore hole
in the fixed front panel.
X X
Screw on the fixing nut [5] to the mounting bracket
and tighten the fixing nut with max. 10 Nm.
Abb. 6.12 Tighten the fixing nut
6.5.1 Installing the control box behind the
floor unit’s fixed front panel
1 2 3 4 6 5
Abb. 6.10 Control box structure
[1] Control box
[2] Adjustment plates
[3] Fixed front panel (not included in the scope of delivery)
[4] Power level sleeve
[5] Fixing nut
[6] Control knob
X X
Draw the bore hole accordingly with the aid of the
drilling template provided.
1
2
5
>105
37
Ø6
Ø30
Abb. 6.11 Drilling template
[1] Worktop
[2] Fixed front panel
X X
Pre-drill the bore hole to prevent tearing out the panel.
Determining the number of adjustment plates
Q Q
The total dimensions of the adjustment plates [2] and
the fixed front panel [3] should be 36 mm.
Q Q
The total dimensions of 36 mm must be adhered to in
order to ensure that the control box [1] functions
smoothly.