6
bona.com
Bona Belt Manual
6
Operator Safety (Cont.)
Sanding may create an explosive environment. Cigarettes, cigars, pipes, lighters, pilot flames, or any other
source of fire may create an explosion, if lit during sanding operations. All sources of ignition should be
removed entirely from the work area.
Poorly ventilated work areas may create an explosive environment, when some combustible materials
(solvents, thinners, alcohol, fuel, some paints, wood dust, etc) are present in the atmosphere. Floor sanding
may cause various materials and fumes to ignite. Read the manufacturer’s instructions for each chemical
product used and establish its combustibility. Always keep the work area well-ventilated.
Striking nails when sanding may generate an explosion or fire. Always ensure all nails are sunk before
sanding surfaces.
Serious injury and/or death due to electrocution may occur, if the power supply circuit trips repeatedly or is
undersized. Have the fuses, safety circuit and power supply line checked by an authorized electrician.
Performing maintenance and/or repairing the machine, when it is not fully disconnected from the power
supply, may cause serious injury and/or death due to electrocution. Disconnect the power supply before
carrying out any maintenance and/or repair work.
The use of this machine on a circuit which is not grounded may cause serious injury and/or death due to
electrocution. Never disconnect or disable the grounding conductor. Consult an electrician, if the ground
conductor is missing or it is suspected that the circuit is not suitably grounded.
The use of this machine with a damaged power supply cable may cause electric shock. Check the
power supply cable regularly for damage, such as splitting or wear and tear.
DO NOT
use
the machine, if the power supply cable is damaged.
DO NOT
use the electric cable to move
the machine. DO NOT close a door on cord. DO NOT pull cord around sharp edges or corners.
DO NOT unplug by pulling on power supply cable. To unplug grasp the plug. DO NOT handle plug or operate
machine with wet hands. DO NOT put any objects into motor openings.
Serious injury and/or death due to electrocution may occur if the machine runs over the power supply
cable and it becomes damaged. Keep the cable away from the sanding tool. Always keep the power supply
cable raised above the machine and sand away from the power supply cable.
The moving parts on this machine may cause serious injury and/or damage. Keep hands, feet and loose
clothing away from all moving parts of the machine.
Operating the machine without all guards, doors, or covers in place can cause an injury or damage.
DO NOT pass with the machine on objects that are hot, burning or smoking, such as cigarettes, matches or
cinders.