21
Routine Maintenance
Before performing any service and maintenance the power cable must be removed from the wall socket.
Check that the power cable holds an area of at least:
EU: 1-phase 3x2.5 mm² (ASO904014)
NOTE! Before restarting, the motor must cool for 3-4 minutes.
The Poly-V belts must be stretched.
Adjust them by:
1)
Loosening the eccentric tightener, lift off the motor and
loosen the M16 screw nut on the eccentric tightener.
2)
Then turn the entire eccentric tightener clockwise ½ turn.
3)
Replace the motor and tighten the eccentric tightener and
check the belt tension.
(Repeat the procedure until the correct belt tension is
achieved).
