26
bona.com
Bona Belt Manual
Service, Maintenance and Spare Parts
Bona Belt is a high quality machine and is tested by authorized test staff at the factory before delivery. However, electrical and mechanical
parts wear down and age during long-term use.
In order to keep the machine in a safe and functioning condition, service must be performed every 250 work hours or least once a year.
This service includes control of wheels, cable stand, motor, tension device, sanding disc function is controlled.
Only Bona's original parts may be used because the machine is considered unique, otherwise safety functions can become impaired.
Always disconnected the power cable to the machine before it is cleaned, tools are changed, maintenance is performed or when worn
parts are replaced.
When you contact Bona or staff approved by Bona in the event of a fault or to order spare parts, always specify the type and serial number
of your machine. This information is located on the data plate of the machine.
The machine may never be cleaned using a high pressure washer or hose.
All maintenance must be done on neutral machine!
Unplug from the wall outlet. Check cable and connectors regularly. Always replace a damaged cord (slots, jacks or cable connections) with
a new original cable.
Service and maintenance
On the Internet, you will find a list of spare parts and exploded views for Bona Belt and other machines in our product range.
Visit http://spareparts.bona.com/
During the factory warranty period, repairs may only be carried by Bona or staff approved by Bona. Other repairs (after the warranty period)
of mechanical or electrical parts on the machine may only be carried out by Bona or staff approved by Bona who has experience and
knowledge concerning safety regulations.
Spare parts and exploded views
