BOMBARDIER SeaDoo Speedster 200, Operator'S Manual

Page: 59 / 113

59
Hull
Inspect hull for cracks or damage.
Jet Pump Water Intakes
Remove weeds, shells, debris or any-
thing else that could restrict the flow
of water and damage the cooling sys-
tems or propulsion units. Clean as nec-
essary. If any obstruction can not be
removed, refer to an authorized dealer
for servicing.
TYPICAL
1. Inspect this area
Inspect leading edges of the impellers,
if they have nicks or bends, perfor-
mance will be greatly reduced.
Bilge
Should water be present in the bilge,
turn on pump switch to completely emp-
ty the bilge.
Battery
Fuel Tank/Oil Levels
With the craft horizontal, fill the fuel tank.
Check the oil level in each engine and re-
fill as necessary.
Check fuel tank retaining straps/fasteners.
Engine Compartment
Fire Extinguisher
Make sure it is full, in good condition
and well secured.
Steering System
Assisted by another person, check steer-
ing operation for free movement. When
the steering is centered, the jet pump
nozzles should be in the straight ahead
position. Ensure the jet pump nozzles
pivot easily while steering is turned.
Throttle System
Check throttle levers for free and
smooth operation.

WARNING
Make sure drain plug is properly
secured prior launching the craft
in water.

WARNING
Verify tightness of battery cables
to their posts and condition of re-
taining straps/fasteners. Do not
boost battery while installed.
F04J1LY
1

WARNING
Should any leak or gasoline odor be
present, do not start the engines.
Consult an authorized dealer.

WARNING
In order to avoid potential burns, do
not remove the radiator cap or loos-
en the engine drain plug if the en-
gine(s) is/are still hot.

WARNING
Check steering and corresponding
steering nozzle operation before
starting engines.

WARNING
Check throttle levers operation be-
fore starting the engines.
lmo2004_002a.book Page 59 Wednesday, May 14, 2003 11:10 AM