BOMBARDIER rally 200, Operator'S Manual

Page: 91 / 130

V06C04Y
Remove oil filter and replace with a
new filter.
NOTE:
Check the cover O-ring and
change it if necessary.
Wipe out any oil spillage on engine.
Remove oil strainer plug then clean oil
strainer.
V06C1WZ
1
1. Oil strainer plug
To clean oil strainer, use a solvent then
dry with compressed air.

WARNING
Always wear eye protection and
gloves.
Reinstall oil strainer plug with a new
gasket.
Change gasket on drain plug. Clean
gasket area on engine and drain plug
then reinstall plug. Refill engine at the
proper level with the recommended
oil. Refer to SPECIFICATIONS for ca-
pacity.
Start engine and let idle for a few min-
utes. Ensure oil filter area and drain
plug areas are not leaking.
Stop engine. Wait a while to allow oil
to flow down to crankcase then check
oil level. Refill as necessary.
Dispose of oil as per your local envi-
ronmental regulations.
Oil Pressure Regulator
When changing engine oil at each 50
hours, the oil pressure regulator must
be removed and cleaned.
The oil pressure regulator is located on
the left side of the engine, near the
cooling drain plug.
1
V06C2FY
2
1. Cooling drain plug
2. Oil pressure regulator plug
Clean plug area then remove it.
Remove valve housing, compression
spring and ball.
90
______________________