BOMBARDIER rally 200, Operator'S Manual

Page: 89 / 130

I: Inspect, verify, clean, adjust,
lubricate or replace if
necessary EVERY
C: Clean
L: Lubricate
R: Replace
Initial
inspection
10 h or
30 days
or 200 km
(125 m.) (1)
25 h or
500 km
(310 m.)
50 h or
1000 km
(620 m.)
100 h or
1 year or
2000 km
(1250 m.)
200 h or
2 years
or
4000 km
(2485 m.)
To be
performed
by
SUSPENSION
Swing arm (2) I Customer
Shock absorbers (2) I Customer
A-arms I Customer
BRAKE
Brake fluid (front and rear)
(2)
I I R (6) Customer
Brake cable (6) I I Customer
Brake pads (6) I (4) Customer
Brake system (discs, hoses, etc.)
(6)
I Customer
BODY/FRAME
Engine compartment C C Customer
Frame
I
Dealer
Hitch/trailer ball condition
(if installed)
EVERY RIDE Customer
Chassis Fasteners I Customer
Seat fasteners
EVERY RIDE
Customer
Vehicle cleaning and protection C (4) Customer
(1) To be performed by an authorized Bombardier ATV dealer. The initial maintenance
is very important and must not be neglected.
(2) Pre-ride inspection item.
(3) Every 100 hours, check coolant strength.
(4) More often under severe use such dusty area, sand, snow, wet or muddy conditions.
(5) Make sure the spark plug is correctly gapped.
(6) Brake fluid replacement or any brake system repairs must be performed by an au-
thorized Bombardier ATV dealer.
88
______________________