21
Set
Manual white balance
63
Call
Image normal
Set
Image Flip
64
Call
Color mode
Set
Black and white mode
65
Call
Auto Day/Night Mode
95
Set
Open menu
97
Call
Start Patrol
Set
Set Patrol Route
99
Call
Auto focus
Set
Manual focus
TOUR SETUP:
The menu is used to manage the tours. Total of 4 tours can be managed.
SEQUENCE NUMBER:
The current tour number that you are managing.
DEFAULT DWELL:
Set the interval time between each of presets in the above tour, the value can be selected from 3 to 255 sec.
EDIT SEQUENCE
:
Set up the above tour.
1.
In the order of
①
②
③
...
⑥
, add each of preset and default dwell time to the tour.
2.
The tour path will be set based on the presets and default dwell have been set in step one.
Preset Number
DEFAULT
DWELL
Preset Number
DEFAULT
DWELL
Preset Number
DEFAULT
DWELL
000
000
000
000
000
000
000
000
000
000
000
000
000
000
000
000
000
000
000
000
000
000
000
000
...
...
...
...
...
...
RUN CONTINOUSELY
: start the tour has been set.
EXIT
: Push the joystick to the right to exit this level menu.
PATTERN SETUP:
A pattern is a memorized, repeating series of pan, tilt, zoom, and preset functions that can be recalled with a command
from a controller or automatically by a programmed function (alarm, park, event, or power-up).
The menu is used to manage the patterns. Total of 4 patterns can be managed.
PATTERN NUMBER
:
The current pattern number that you are managing.
RECORD NEW PATTERN
:
Set up the above pattern.
1.
Push the joystick to the right to enter this setting menu.
2.
Move the camera to the start position you want, and then call the preset 1 to save.
3.
Move the camera to each position you want to record the pattern, and then call the preset1 to end.
4.
Finished.
RUN CONTINIUSELY
: start the above pattern.
EXIT
: Push the joystick to the right to exit this level menu.
SCAN SETUP
The menu is used to manage the scans. Total of 4 scans can be manage.
PANNING NUMBER
:
The current scan number that you are managing.
SET LEFT LIMET
:
Set the left limit of the camera scan.
1.
Push the joystick to the right to enter this setting menu.
2.
Move the camera to the left limit position that you want, and then call the preset 1 to save.
SET RIGHT LIMET
:
Set the right limit of the camera scan.
①
②
③
④
⑤
⑥
