18
NONE
: No effect.
A/F
: After operating the camera, the mode of focus be changed to auto form
manual.
A/I:
After operate the camera, the mode of IRIS be changed to auto form
manual.
AF-AI
: After operate the camera, the mode of focus be changed to auto form
manual, and, the mode of IRIS be changed to auto form manual.
A/F RECOVER TIME:
When the camera is not in operation, if in the manual focus mode, after the A/F
RECOVER TIME, it will automatically transfer to the automatic focus.
If the time is 0, then the function is closed.
A/I RECOVER TIME:
When the camera is not in operation, if in the manual Iris mode, after the A/I RECOVER TIME, it will automatically
transfer to the automatic Iris.
If the time is 0, then the function is closed.
FOCUS NEAR LIMIT:
The near limit from the following: 1cm, 11cm, 30cm, 0.8m, 1.2m, 1.4m, 1.65m, 2.0m, 2.5m, 3.1m, 4.2m, 6.0m, 10m, 20m.
DAY/NITE MODE:
You can select the mode from AUTO, DAY and NIGHT.
When the camera is set to
AUTO
mode, the camera will automatically turn from Day mode (Color) to Night mode
(Black & White) when the lighting condition is low enough, the camera illuminator will be turned on automatically
at Night mode.
When the camera is set to
Day
mode, the camera will stay in Day mode (Color) no matter how low the lighting
condition is, the camera illuminator will not be turned on at Night. The image may be too dark to be seen in a low
light condition.
When the camera is set to
Night
mode, the camera will stay in Night mode (Black & White) no matter how bright
the lighting condition is, the camera illuminator will be turned on all the time. The image will be stay in Black &
White.
AUTO ICR THRESHOLD:
Set AUTO ICR THRESHOLD value to from 0 to 15 (The sensitivity from low to high).
GAMMA:
The gamma can be set to Auto, Manual, and value from 0 to 4.
ZOOMING SPEED:
The gamma can be set to value from 1 to 8.
PRESET SPEED:
The gamma can be set to value from 1 to 255.
EXIT:
Push the joystick to the right to exit this level menu.
SYSTEM SETUP Menu
The SYSTEM SETUP menu is used to set the items related to the camera system.
FACTORY DEFAULT:
The menu is used to restore the factory settings.
DISPLAY CONFIGURATION:
Entered the menu of DISPLAY CONFIGURATION, it will be shown the below
items:
ZOOM LENSPOSITION:
Select ON to display the zoom lens position on the screen.
DIRECTION INDICATOR:
Select ON to display the direction indicator on the screen.
DIGITAL ZOOM: OFF
JOYSTICK RECOVER
：
NONE
A/F RECOVER TIME: 000
A/I PECOVER TIME: 000
FOCUS NEAR IMIT: 30CM
DAY/NITE MODE: NITE
AUTO ICR HRESHOLD: 28
GAMMA: NORMAL
ZOOMING SPEED: 8
PRESET SPEED: 255
EXIT
EXPOSURE
WHITE BALANCE
PICTURE
LENS PARAMETERS
〉
SYSTEM SETUP
FUNCTION SETTING
EXIT
FACTORY DEFAULT
DISPLAY CONFIGURATION
〉
INTERFACE SET
FLIP: OFF
SDI VIDEO: 1080P30
IP VIDEO : 1080P
PROPORTIONAL PT: ON
SET NORTH
SYSTEM INFO
SYSTEM RESET
EXIT
