Bolderton 716240 Manual Download Page 23

 

 

 

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.

ATTENTION!! 

WHEN YOU SEE A “  WARNING!” BE SURE TO HEED THE MESSAGE!

THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!

STANDARD LIMITED WARRANTY

 

to be free from defects in material and workmanship for a period of twelve months from the original date of retail 
purchase. WW Industrial Corp warrants the enclosed hardware (where applicable) is delivered to be free from physical 

defects for a period of twelve months from the original date of retail purchase.

Repair Procedures, Exclusive Remedy: 

WW Industrial Corp will at its option, repair, or replace products not conforming 

to this limited warranty at no charge. THIS IS THE SOLE AND EXCLUSIVE REMEDY AVAILABLE FOR BREACH OF WARRANTY  

contact the customer service department at 952-955-9263. When you receive authorization, return the product as directed
at your expense. Product repairs not covered by warranty, and product updates, will be provided at a set rate. 

Limitations: 

This warranty is void if the product is damaged by improper or abnormal use or by accident; if the product 

is made to repair the product without authorization from WW Industrial Corp. It is solely the purchaser’s responsibility  
to determine the suitability of these products for each particular application. WW Industrial Corp products are intended 
for hunting and hunting only. WW Industrial Corp products are not suitable in all events, and are not authorized, for  

use in any situations that might pose potentially injurious to life and health, other than those situations that the pro-

ducts are intended for. This warranty is not assignable or transferable.

No Other Warranties:

 ALL OTHER WARRANTIES AND REPRESENTATIONS, ORAL OR WRITTEN, EXPRESSED OR 

IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR 
A PARTICULAR PURPOSE, ARE EXCLUDED AND DO NOT APPLY. THERE ARE NO WARRANTIES WHICH EXTEND 
BEYOND  THE DESCRIPTION ON THE FACE HERE OF. Except as required by law, no representative, agent or employee 
of WW Industrial Corp is authorized to make warranties, representations, or obligations inconsistent with or in 

 

addition to those set forth in this limited warranty.

No Damages:

 IN NO EVENT WILL WW INDUSTRIAL CORP BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,   

 

OR CONSEQUENTIAL DAMAGES RESULTING FROM BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL THEORY, 
even if advised of the possibility of such damages. In no event will WW Industrial Corp be liable for sums in excess 

damage or destruction of items or equipment used with, or in conjunction with, WW Industrial Corp; personal injury 
or loss; or any other damages.

General: 

(a) This agreement is the entire agreement between you and WW Industrial Corp; supersedes any prior or

Industrial Corp. (b) Waiver by any party of any default or breach of this agreement will not constitute a waiver of any

di˜erent agreements, representations, or proposals; and may be changed only by written agreement with WW

Minnesota, U.S.A.

WARRANTY: 

WW Industrial Corp warrants all WW Industrial Corp climbing system products and hunting accessories 

This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.

is altered or modiÿed in any way other than those directed by o˛cial WW Industrial Corp instructions; or if any attempt

23

Summary of Contents for 716240

























Reviews: