manualshive.com logo in svg

Bolderton 716240, Manual, Page: 12 / 24

Share
Download
Bolderton 716240 Manual Download Page 12

STEP 7.

 Connect the Left and Right Shooting Rails using one (1) (A) 1/4" x 1 1/4" Hex   

Bolt and one (1) (N) 1/4" Wiz Nut. Attach the assembled Shooting Rail to the outside

of the Armrests using two (2) (I) 1/4" x 2 1/2"Carriage Bolts (already installed) two (2)

(2) (K)  3/8" Nylon Spacers and two (2) (L) 1/4" Delta Nuts. Next attach Shooting Rail

Foam and Armrest Foams to Shooting Rail and Armrests. Install Armrest Covers and

Shooting Rail Cover by laying them over foam and securing Velcro. Install Accessory

Hooks and Drink Holder in desired locations. (Fig. 5)

FIGURE 5

WARNING!  Shooting rail is provided for comfort and should be used as a shooting rail only. The shooting rail is 

not designed to carry the full weight of the user. Never place more than fifteen (15) lbs of force on the shooting rail. 

Failure to follow these instructions may result in serious injury or death!   

This instruction manual complies with ASTM F2123 Standard Practice for Treestand Instruction.

STEP 6. 

 A

ttach the Left 

and Right

 

Backrest 

Supports to the

 

Rear Foot 

Platform using

 

three (3) 

1/4”1/4” x 2” Hex  Bolt (D), 

six (6) Nylon Washers and 

three (3) 1/4”

 Nylock Nut. (Fig. 5)

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.

Summary of Contents for 716240

























Reviews:

No comments