LADDER
SECTION C
BRACE
NOTE:
While doing Step 8 you will be able to visibly see
the Jaws moving to the point the Jaw bark biters touch
the tree. (Fig 14).
NOTE:
Make sure the
Jaws contact the tree
evenly and are not
obstructed by knots,
branches, etc.
19
FIGURE 15
FIGURE 14
STEP 8b.
Criss-cross the
cables behind the tree trunk
pulling snug. (Fig. 17) Then
run each Jaw Tightening Cable
through the eyelets that are
welded to the Lower Bark Biter
Ladder Braces. (Fig. 15)
JAW
REAR FRANE
SUPPORT
JAW
TREE TRUNK
STEP 8a.
When the Lower
Bark Biters are secured
using the Ratchet Strap
(Ratchet Strap A) and
the lower bark biter is
assembled properly
(Fig. 13), grab the Jaw
Tightening Cables.
Holding one (1) cable in
each hand, stand behind
the tree and pull down
on each cable.
This instruction manual complies with ASTM F2123 Standard Practice for Treestand Instruction.
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.