Bogen Nyquist C4000 Series User Manual Download Page 127

Page: 127 / 146

115

Priority

Select the message priority, which can range

from

0 (Lowest)

6 - (Fullscreen)

. Priority

6 - (Fullscreen)

is the highest priority, and

when a message is assigned this priority,

only the messages with this priority appear

on the display with the Scheduled Event

Name and Date being temporarily removed.

If Priority

5 (Exclusive)

is selected, the

Scheduled Event

Name and Date

remain on

the display, but all other messages with

lower priorities are removed.

Background Color

Select the color for the message background.

You can select a color by:
• Using the color picker
• Entering a hex color (for example:

#000000, for black)

• Entering an RGB color (for example:

rgb(0,0,0) for black)

• Entering a color alias name (for example:

red, blue, etc.)

For more information, see

"Using Color in

Display Messages” on page 116

Font

Select the down arrow to view a list of avail-

able fonts and then select the desired font

for the message text. Available fonts are:

Comic-Relief

Courier-Prime

Gelasio

Liberation Sans

Linux Libertine

Font Size

Enter the desired font size.

Table 7-1, Display Message Options (Continued)

Summary of Contents for Nyquist C4000 Series


















































































































































Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands

Bogen Nyquist C4000 Series, User Manual

Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands