Bogen Nyquist C4000 Series User Manual Download Page 67

Page: 67 / 146

3.6

Editing Announcements

From the Edit Announcement page, you can edit an audio file’s

parameters such as times to play.

Creation Date/Time

Displays when the announcement was created.

Created By

Displays the extension that is to be considered the source

of the announcement for CoS considerations.

Times to Play

Displays the number of times the announcement will play.

This number can range from 0 through 10.

Note:

A setting of 0 results in the announcement playing

continuously until it is manually stopped via the dashboard.

Times Between
Repeats (seconds)

Displays the time in seconds before replaying the

announcement.

Play to Zone

Displays either

All Speakers

or a specific zone for this

announcement to play.

Note:

If the

Type

for the station is set to

Admin Web Inter-

face

Admin Phone

IP Phone

Analog Phone

, or

Mobile

Device

and an

Announcement Zone

was set for the sta-

tion, the

Announcement Zone

overrides the

Play to Zone

Description

Provides a description of the announcement.

Note:

Valid characters include uppercase letters (A-Z), low-

ercase letters (a-z), numerals (0-9), space, and the following

special characters:

!@$*?-.,

Playback

Allows you to manually play the announcement. Selecting

the

Menu

icon and then the down arrow in this field also

allows you to download and save the announcement.

Table 3-3, Announcements Page Parameters (Continued)

Note:

The navigation bar does not appear if you are not authorized

to make changes to the C4000 configuration. Contact your system

administrator or refer to the

Nyquist C4000 System Administrator

Manual

Summary of Contents for Nyquist C4000 Series


















































































































































Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands

Bogen Nyquist C4000 Series, User Manual

Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands