Bogen Nyquist C4000 Series User Manual Download Page 86

Page: 86 / 146

Table 4-5, Edit Tone Page Parameters

Name

Displays the name for this tone.

Note:

This parameter cannot be changed for default sys-

tem Tones.

Note:

Valid characters include uppercase letters (A-Z), low-

ercase letters (a-z), numerals (0-9), space, and the follow-

ing special characters:

!@$*?-.,

Type

Use the drop-down menu to select if the tone is Normal or

Alarm.

Hide

Specifies if the tone is to be hidden from the dashboard

view.

Times to Play

Displays the number of times the tone will play. Parame-

ters are 0 through 10.

Note:

A setting of 0 results in the tone playing continuously

until it is manually stopped via the dashboard. This param-

eter does not appear for Line Input tones.

Time Between Repeats
(second)

Displays the time in seconds between replaying of the

tone. You can select between 0.5 to 5 in 0.5 increments.

Note:

This parameter does not appear for Line Input tones.

DTMF Code

Provides the DTMF code used with manual dial pad

announcement or tone activation.

Length

Provides the length of the tone.

Note:

This parameter cannot be changed except for Line

Input tones.

File Upload

Select

Choose File

, navigate to the audio file, and then

select the file if you want to choose a new file.

Note:

This parameter only appears for user-provided tones

but not for Line Input tones.

Summary of Contents for Nyquist C4000 Series


















































































































































Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands

Bogen Nyquist C4000 Series, User Manual

Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands