Bogen Nyquist C4000 Series User Manual Download Page 101

Page: 101 / 146

5.4.2

Record Page

You can record a page to be added to a zone queue. The maximum

recording time for a page is 60 minutes; if the recording exceeds 60

minutes, it will time out and not be saved. If the recording is silent for

60 seconds, it will time out and not be saved.
The pages in the zone’s queue are played in the order that they are

placed in the queue.
A live page started on a zone that is playing a recorded page will

cause the recorded page to be terminated and sent back to the

queue. The interrupted message will play again, from the beginning

of the message, when the zone becomes idle. Multi-Site Emergency-

All-Call, Multi-Site All-Call, Emergency All-Call, All-Call, Alarm, Tone,

and Emergency Announcement will also interrupt any playing

recorded zone messages. All re-queued interrupted messages will

play again, from the beginning of the message, when the zones

becomes idle.
Selecting

Disable Audio

will cause all recorded messages to stop.

The messages will resume play from the beginning when audio is re-

enabled.

To record a page for page queuing:

Step 1

If not already on your dashboard, select

Dashboard

from the navigation bar.

Figure 5-14, Record Page Button

Summary of Contents for Nyquist C4000 Series


















































































































































Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands

Bogen Nyquist C4000 Series, User Manual

Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands