Bogen Nyquist C4000 Series User Manual Download Page 115

Page: 115 / 146

103

You can also select the following

Display Options

Additional information that appears on the Manage Check-In

window includes:
• Status of check-in process such as

Active

• Number of stations that have checked in
• Number of stations that have not yet checked in
• Number of vacant stations
• Date and time check-in started
• If check-in has been manually stopped or is done.

Red

Not checked in

Gray

Check-in is not expected because the station

is either on the vacant or excluded lists.

Table 6-2, Check-In Display Options

Show Vacant

When enabled, stations in the Vacancy List

appear in the color-coded display.

Show Excluded

When enabled, stations in the Exclusion List

appear in the color-coded display.

Show Name

When enabled, the station’s name appears

along with the station’s extension number.

Displaying the name is useful if you are not

sure where a station is located when only the

extension number is displayed.

Show Not
Checked In Only

Note:

Show Vacant

and

Show Excluded

options are disabled when this option is

selected.
When enabled, only the stations that have

not checked in are listed. This option may be

preferable if a large number of stations are

managed by your Nyquist server, and you

want to quickly view which stations have not

checked in.

Table 6-1, Color-coded Check-In Status (Continued)

Color

Status

Summary of Contents for Nyquist C4000 Series


















































































































































Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands

Bogen Nyquist C4000 Series, User Manual

Search results

Summary of Contents for Nyquist C4000 Series

Reviews:

Related manuals for Nyquist C4000 Series

Brands by name

Popular brands