40
Elite
4.3
Cable Adjustment
The cables should be tensioned so that the top weight plate is just resting on the other weight
plates. As soon as the top weight plate does not rest on the other weight plates, the cable should be
extended. As soon as the cable slackens, the cable must be shortened.
4.3.1
Extend or Shorten the Cable
Rough adjustments in length can be made on the adjustable pulley blocks:
+
Move the lower pulley downwards
→
extend
+
Move the lower pulley upwards
→
shorten
4.3.2
Fine Adjustment
If the cable length has been adjusted or only slight adjustments are required, fine adjustment must
be made to the stop plates or the cable threads:
+
The stop plates above the adjustable pulley blocks must be adjusted so that they barely
touch the upper frame.
+
The cable threads can be screwed further into or out of the slots. After each adjustment,
secure the cable by tightening the jam-nut.
⚠
CAUTION
At least one third of the thread must be screwed into the slot.
Stop Plate
Cable threads
Adjustable Pulley
Blocks
Summary of Contents for SW-95.0225-G
