BodyCraft SW-95.0225-G, Assembly And Operating Instructions Manual

Page: 16 / 58

16
Elite
Step 3: Assemble Cable Arm
࣑
ATTENTION
Remember to keep all BOLTS loose to ensure the holes will align easily.
1. Attach the CABLE ARM ASSEMBLY (18) to the MAIN FRAME (1), using two 1/2” X 3-1/4” HEX
BOLTS (130) four 1/2” SMALLER WASHERS (161) and two 1/2” NYLA-NUTS (169).
2. Attach CABLE ARM ASSEMBLY (18) to the CABLE ARM CONNECTOR (19), using two 3/8” X 1”
HEX THREADED BOLTS (137) and two 3/8” LARGER WASHERS (163). Then attach the CABLE ARM
CONNECTOR (19) to FRONT UPRIGHT (3), using one 1/2” X 2-3/4” HEX BOLT (131) and one 1/2”
SMALLER WASHER (161).
3. Completely Insert the AXLE of each CABLE ARM (16) into the holes of the axle plates on the
CABLE ARM ASSEMBLY (18) and secure by tightening the preinstalled 5/16” X 1/4” SET SCREW
(158) in the COLLARS (51).
࣑ ATTENTION
Check to ensure that both Cable Arms (16) pivot freely and cables are not twisted.