6
STEP 1 ASSEMBLE BASE FRAME
80
100
55
55
100
87
87
87
100
100
55
2
104
100
104
3
4
100
100
100
100
87
87
54
17
100
10
104
104
55
87
35
35
34
34
58
1
104 100
100 82
82
100
79
100
58
81
81
100
1. Attach
FRONT UPRIGHT (3)
to
BASE
FRAME (1)
, using two
3/8" X 3" HEX
HEAD BOLTS (82)
, four
3/8" WASHERS
(100)
and two
3/8" NYLA-NUTS (104)
.
2. Attach
REAR UPRIGHT (4)
to
BASE FRAME
(1)
, using three
3/8" X 3/4" BUTTON HEAD
BOLTS (87)
and three
3/8" WASHERS (100)
.
3. Insert the two
1-1/4" ROUND END PLUGS (58)
into the ends of the round Foot Plate Tube. Insert
one
2" X 3" END CAP (54)
into the rear of the
BASE FRAME (1)
. Insert one
2" SQUARE END
CAP (55)
into the side of the
BASE FRAME (1)
.
4. Attach
TOP FRAME (2)
to
REAR UPRIGHT (4)
,
using three
3/8" X 3/4" BUTTON HEAD BOLTS
(87)
and three
3/8" WASHERS (100)
.
5. Attach the
TOP FRAME (2)
to the
FRONT
UPRIGHT (3)
using two
3/8" X 3-1/8" HEX HEAD
BOLTS (80)
, four
3/8" WASHERS (100)
, and two
3/8" NYLA-NUTS (104)
.
6. Insert three
2" SQUARE END CAPS (55)
to
each end of the
TOP FRAME (2)
.
7. Loosely attach
UPRIGHT SUPPORT
FRAME (10)
to the
FRONT UPRIGHT
(3)
using two
3/8" X 4-1/4" HEX
HEAD BOLTS (79)
, four
3/8"
WASHERS (100)
, and two
3/8"
NYLA-NUTS (104)
. Attach
UPRIGHT
SUPPORT FRAME (10)
to
BASE
FRAME (1)
and
STABILIZING PLATE
(17)
using two
3/8" X 3-1/4" HEX
HEAD BOLTS (81)
, four
3/8"
WASHERS (100)
and two
3/8"
NYLA-NUTS
.
To ease the assembly process, Do
not tighten bolts until instructed.
Skip Step 7 if you have purchased
the GLX/Cable Arm Option.
NOTE: (If you have purchased the Optional
Weight Stack Shrouds, you may need to
temporarily remove the upright support.
