10
STEP 4
ASSEMBLE WEIGHT STACK
91
77
32
31
5
20
20
67
67
30
89
94
89
2
33
2.
APPLY SILICONE to the GUIDE RODS
(5), then CAREFULLY slide
a total of
14
WEIGHT PLATES (33)
(NOTE: 19
WEIGHT PLATES if you have the optional
50lb add-on kit) one at a time onto the
GUIDE RODS (5)
making sure to orient
the selector holes toward the front and
bottom. Attach the
SELCTOR ROD (31)
to
the
TOP PLATE (32)
using
TOP PLATE
BOLT (91)
and Tighten. Slide top plate
assembly onto the weight stack.
1. Insert two
1" ID PLASTIC GUIDE ROD HOLDERS (62)
into the holes on the
BASE
FRAME (1)
. Insert the
GUIDE RODS (5)
into the
1" ID PLASTIC GUIDE ROD HOLDERS
(62)
. See Note below before proceeding! Slide the
LONGER STACK SPACERS (19)
onto
the
GUIDE RODS (5)
, followed by the
RUBBER CUSHIONS (67)
.
NOTE: If you have purchased the 50lb Add-on Weight
Plate kit use the Shorter Stack Spacers (20) in
place of the Longer Stack Spacers (19).
CAUTION. Be CAREFULL NOT
to pinch fingers when lowering
the weight plates in the next step.
3. Attach the
GUIDE
ROD MOUNT (30)
onto the
GUIDE
RODS (5)
, then
attach to
TOP
FRAME (2)
using
two
5/16" X 5/8"
BUTTON HEAD
BOLTS (89)
as
shown. Tighten
5/16" X 1/4" SET
SCREWS (94)
into
the
GUIDE RODS
(5)
.
