![background image](http://html.mh-extra.com/html/bodet/kelio-visio/kelio-visio_instructions-manual_2782429002.webp)
2
TABLE OF CONTENTS
1. INITIAL CHECK
Each terminal is supplied in its original package with two bags, each of them containing 2 screws,
2 dowel pins and 3 clamping collars pre-fastened to the back of the concentrator (these clamping
collars are used to fasten the cables under dangerous voltage).
2. WARNING
Any use that does not comply with these instructions can cause irreversible damage to the
electronic board of the device and voids the warranty.
Before installing and using the terminal, please read and make sure you understand the
safety instructions set out in paragraph "Consignes de sécurité et protection de l’appareil"
of this manual.
The terminal is a CLASS 1 device. As a result, the presence of a protective
earth connection is mandatory (connector [B2])