![background image](http://html1.mh-extra.com/html/swegon/tblz-4-75/tblz-4-75_instructions-manual_1413661001.webp)
EN.TBLZ475.190701
Swegon reserves the right to alter published specifi cations without notice.
www.swegon.com 1
Instructions for the hand-held terminal
of the fan motor control system, TBLZ-4-75
SILVER C
1. General
The hand-held terminal TBLZ-4-75 is a control panel with
touch screen that is used to set motor parameters on
SILVER C. The hand-held terminal communicates with the
motor control system via a Modbus interface.
2. Installation
The hand-held terminal can be mounted on a fl at surface
using screws or magnets.
There is a keyhole slot at the rear of the hand-held termi-
nal for mounting with a screw, which is inserted on a fl at
surface, see the diagram to the right. Use a screw with
a maximum diameter of 3.5 mm and a max. length of 9
mm.
The black shock-absorbing casing comes with two mag-
nets that make it possible to hang the hand-hand terminal
on a vertical, fl at and metallic surface.
3. Technical data
Supply voltage
From the motor control
system's wiring terminal
Modbus RTU
1 x RJ12 (RS485)
Enclosure class
IP21
Relative humidity
0 – 95 % (non-condensing)
Ambient temperature
-10... +40 °C (in operation)
Dimensions without
shock-absorbing casing
80 x 121 x 42 mm
Dimensions with
shock-absorbing casing
86 x 127 x 51 mm
Max. power consumption 900 mW