The terminal is inserted in the Kelio system via a network connected to a computer.
Description
Features
Storage capacity
32 Mo
Autonomous operation
2 hours on internal battery
Clocking distance for 125 kHz proximity
badges
0.5 to 5
cm according to type of badge
Mains supply voltage
Nominal current
230V +/- 10% 50Hz
80 mA
Power supply category
Class 1
(protection earth is mandatory)
Mains supply diagram
TT or TN diagram
Type of power supply
Switching power supply
Low voltage supply input:
Nominal current:
Mains supply detection:
11.5 to 15
Vdc
1 A
"Mains supply" input = 12 V, no mains supply = 0 V.
The signal indicates whether the external power
supply is mains- or battery-operated (using its own
batteries).
Protection index
IP 20
Operating temperature
0° to +50 °C
Relative humidity
15 to 90 % without condensation
Cable on mains concentrator block
1.5-2.5 mm², stripped over 5 mm
Alarm input
For dry contact connection. Typical connection to
the output relay of a fire alarm station (commutated
current <10 mA)
Relay change-over (break, make, common)
Disconnection 230 V 50 Hz 4 A maximum.
Possibility to switch a SELV voltage (Safety Extra
Low Voltage). Breaking capacity at minimum load =
10 mA / 5 V
Cable on relay terminal block
1.52.5 mm², stripped over 5 mm
External power supply output
11,5 to 14,5 V, 200 mA
max
. The voltage is
commutated via the terminal firmware.
Clocking distance for MIFARE proximity
badges (13.56 MHz)
0.5 to 4 cm according to type of badge and
environment
France Inter/DCF time reception:
Type:
Max. output current:
Max. voltage:
4-20 mA current loop
50 mA
14.5
VDC
PC serial link
RS232
COM3 and COM4 serial links
RS485
Internal protections
By internal, automatically resettable fuses.
Weight
1.7 kg
Screen
2 line x 24 character LCD backlit display (blue)
Casing material
ABS plastic
© 2013 Bodet Software. All rights reserved.
