5. ENROLMENT
Before you can clock using the biometric sensor, you must “enrol” yourself. To do so, enter the 4-
digit code using the biometric terminal keypad (configured in the Installation Module of the Kelio
software, H
ARDWARE
>
T
ERMINALS
>
S
ITES
>
M
AINTENANCE
) menu, then press
E
.
5.1 Authentication mode
The following display appears on the screen:
Press the
BIO
key.
The following display appears on the screen:
Press the
ENROLE
key.
The following display appears on the screen if
the terminal does not have a Mifare reader:
Otherwise, the “BADG” mode is
automatically selected.
XXX is the number of fingerprints that can still
be stored in the terminal.
Press the
BADGE
key.
The following display appears on the screen:
Swipe your badge.
The following display appears on the screen:
Press the
OK
key if your surname and your
first name are displayed.
The following display appears on the screen:
Place your finger.
The following display appears on the screen:
Remove your finger.
Place and remove the finger as many times as requested. XXX is the quality of the enrolment
executed out of 100. If the score obtained is less than 85, it is recommended to re-enrol.
SETUP
COM TEST
BIO
QUIT
BIOMETRY
ENROLLED
DEL
QUIT
ENROLMENT
XXX
BADG CODE LIST
QUIT
IDENTIFY YOURSELF
QUIT
SALLY ASTON
PREV
NEXT
OK
QUIT
PLACE YOUR FINGER
QUIT
REMOVE YOUR FINGER
XX
QUIT