![background image](http://html.mh-extra.com/html/bodet/kelio-visio/kelio-visio_instructions-manual_2782429012.webp)
12
9.4 Reset IP address
•
Launch the identification in the TEST module, then in Hardware control.
•
Enter the Rst module (Reset).
9.5 Connection
There are three ways to see and test the connection between Kelio Visio and the server/computer:
•
Perform a communication test in INSTALLATION > TERMINALS MENU > MAINTENANCE
> COMMUNICATION TEST > RUN
•
Enter the work post number used to connect the reader in the browser address http://work
post number:8089/term-server/homepage
Ex http://4279b:8089/term-serveur/homepage click on « Go on On » to activate/deactivate the
connection of your hardware/terminals with the server
•
Enter the INSTALLATION
MENU
>
TERMINAL
SUPERVISION
>
HARDWARE
STATE
>
FILTER