Design and function
Advanced settings
099-000143-BOC01
16.11.2009
57
5.12.4
Setting the welding current (absolute/percentage)
The welding currents for start current, secondary current, end current and hotstart current can be set as
percentages (factory setting) or absolute values.
If absolute current display is set, the "AMP" signal light for the main current is lit in addition to the
respective "AMP%" signal light. However, in percentage display mode, only the respective "AMP%" signal
light is lit.
AMP
VOLT
JOB
Figure 5-23
Display Setting/selection
Lock JOB menu
Protect welding parameters from unauthorised access
Settings
Settings for machine functions and parameter displays
Welding current display, percentage
Representation of the welding current as a percentage in relation to the main current
setting (AMP). Example: Main current setting to 120A and secondary current to 50%
results in an absolute secondary current of 60A.
Welding current display, absolute
Absolute representation of all welding currents in amperes
Exit the menu
Exit
