Design and function
Remote control
099-000143-BOC01
16.11.2009
51
5.10
Remote control
NOTE
The remote control is operated on the 19-pole remote control connection socket.
• If required, extension cables are available in different lengths (see chapter Accessories).
• Plug the remote control unit into the remote control connection socket on the welding
machine or wire feed unit and lock it only when the machine is switched off.
• The remote control is detected automatically when the welding machine is switched on.
5.10.1
Manual remote control RT 1
Functions
• Infinitely adjustable welding current (0% to 100%) depending on the preselected
main current on the welding machine.
5.10.2
Foot-operated remote control RTF 1
Functions
• Infinitely adjustable welding current (0% to 100%) depending on the preselected
main current on the welding machine.
• Start/stop welding operation (TIG)
ActivArc welding is not possible in combination with the RTF 1 foot-operated remote control.
5.10.3
Manual remote control RTP 1
Functions
• TIG/MMA
• Infinitely adjustable welding current (0% to 100%) depending on the preselected
main current on the welding machine.
• Pulse/spot/normal
• Pulse, spot and break times are infinitely adjustable.
5.10.4
Manual remote control RTP 2
Functions
• TIG/MMA.
• Infinitely adjustable welding current (0% to 100%) depending on the preselected
main current on the welding machine.
• Pulse/spot/normal
• Frequency and spot times infinitely adjustable.
• Coarse adjustment of the cycle frequency.
• Pulse/pause ratio (balance) adjustable from 10% to 90%.
5.10.5
RTP 3 manual remote control
Functions
• TIG / MMA.
• Infinitely adjustable welding current (0% to 100%) depending on the preselected
main current on the welding machine.
• Pulse / SpotArc spots / normal
• Frequency and spot time infinitely adjustable.
• Coarse adjustment of the pulse frequency.
• Pulse/pause ratio (balance) adjustable from 10% to 90%.
