Design and function
TIG welding
42
099-000143-BOC01
16.11.2009
5.8.9
Torch mode and up/down speed setting
The user has the modes 1 to 4 and modes 11 to 14 available. Modes 11 to 14 include the same function
options as 1 to 4, but without tapping function for the secondary current.
The function options in the individual modes can be found in the tables for the corresponding torch types.
The welding process can of course be switched on and off in all modes using torch trigger 1 (TT 1).
AMP
VOLT
JOB
Figure 5-16
Display Setting/selection
Lock JOB menu
Protect welding parameters from unauthorised access
Torch configuration menu
Set welding torch functions
Torch mode setting
Modes 1-4: with tapping function*, modes 11-14: without tapping function*
Up-/Down speed (not available in modes 4 and 14)
Increase value = rapid current change
Reduce value = slow current change
Exit the menu
Exit
*
Tapping function:
Tap briefly on the torch trigger to initiate a function change, e.g. changeover from main to
secondary current (for more in-depth information, see chapter "Setting the torch mode and
up/down speed").
NOTE
Only the modes listed are suitable for the corresponding torch types.
