Safety instructions
General
10
099-000143-BOC01
16.11.2009
CAUTION
Obligations of the operator!
In the European Economic Area (EEA), the relevant national version of the basic
guidelines must be followed and observed!
• National version of the basic guidelines (89/391/EEC) as well as the relevant individual
guidelines.
• Please note that under no circumstances should any equipment or parts be altered or
changed in any way from the standard specification without written permission given by
BOC. To do so, will void the Equipment Warranty.
• Further information can be obtained from Welding Institute of Australia (WTIA) Technical
Note No.7 ´Health and Safety Welding` Published by WTIA, PO Box 6165 Silverwater NSW
2128 Phone (02) 9748 4443.
Damage due to the use of non-genuine parts!
The manufacturer's warranty becomes void if non-genuine parts are used!
• Only use system components and options (power sources, welding torches, electrode
holders, remote controls, spare parts and replacement parts, etc.) from our range of
products!
• Only insert and lock accessory components into the relevant connection socket when the
machine is switched off.
Electromagnetic interference!
The machines are intended to be used in industrial areas, according to IEC 60974-10. If
they are used in residential areas, for example, problems may occur with ensuring
electromagnetic compatibility.
• Check whether interference is caused to other machines!
