BobsCNC REVOLUTION, Assembly Manual

Page: 150 / 151

149
Appendix
Revolution Washer Dimensions
Part number Description ID OD
Thickness
(min) Thickness (max)
H41 Eccentric Washer 0.453 0.750 0.059 0.063
H42 Bearing Fender Washer 0.250 0.750 0.060 0.090
H50 Idler Fender Washer 0.203 0.750 0.043 0.051
H57 Bearing Retainer Washer 0.172 0.050 0.050 0.080
H66 1/4 Shim Washer 0.256 0.500 0.028 0.035
Revolution Firmware Values
Key Value Description
$0 10 (step pulse, usec)
$1 25 (step idle delay, msec)
$2 0 (step port invert mask:00000000)
$3 0 (dir port invert mask:00000000)
$4 0 (step enable invert, bool)
$5 1 (limit pins invert, bool)
$6 0 (probe pin invert, bool)
$10 1 (status report mask:00000011)
$11 0.01 (junction deviation, mm)
$12 0.002 (arc tolerance, mm)
$13 0 (report inches, bool)
$20 1 (soft limits, bool)
$21 0 (hard limits, bool)
$22 1 (homing cycle, bool)
$23 1 (homing dir invert mask:00000001)
$24 250 (homing feed, mm/min)
$25 2000 (homing seek, mm/min)
$26 250 (homing debounce, msec)